All Rotomoulders can identify a shop floor ‘work-around’ – an issue that keeps occurring on an all too regular basis and one that needs a way of ‘working around’. A simple ‘work around’ problem can have a big impact on your business, costing you time and money.
A common ‘work around’ situation is the extra work required to remove residual glue from parts and moulds before and after applying INMOULD graphics.
The problem can be dealt with simply and effectively by using PSI Brand’s new PTAC peel off adhesive system for INMOULD graphics, which makes applying graphics easier, reduces wastage and totally eliminates the need for solvents or hazardous products to remove glue.
“We have been developing this system over the past three years and believe we have achieved our goal with PTAC, a true champion product,” says Jim Crawshaw.
Jared Mills of Hi-Tech Plastics has trialled the new PTAC system and is impressed. He wrote: “I ran one of the samples and you guys have nailed it. We will be placing an order using the PTAC system when our stocks get low. Thanks again for the sample, really appreciate it and it will speed up time our end.”
PSI Brand continues to invest in research and leads product development in the rotational moulding industry. To find out more about the PTAC peel off adhesive system or to request samples, please contact us. Phone +64 6 834 4808 or email sales@psibrand.com or visit our website www.psibrand.com for videos and product information.
from an article at RotoWorld®
https://rotoworldmag.com/psi-brand-eliminating-work-around-in-the-workplace/
No comments:
Post a Comment